ET-3G™ is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). et-3g has a long working time: 50 min at 70 f (21 c) , and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50 f (10 c) to 110 f (43 c). Simpson strong-tie epoxy anchors for concrete and masonry are rigorously tested to meet ibc requirements, including for both cracked and uncracked concrete applications.
- Exceptional performance — superior bond strengths permit ductile solutions in high seismic areas
- Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
- Design flexibility — improved sustained load performance at elevated temperature
- Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from –40 F (–40 C) to 176 F (80 C)
- Manufactured in the USA using global materials
- 22-oz. side-by-side cartridge
- Tested in accordance with ICC-ES AC308 (ESR-4057), ACI 355.4 and applicable ASTM test methods
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning; see Code Report (ESR-4057) for approved systems
- Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair SET-3G adhesive performance
- (1) EMN22i mixing nozzle and (1) nozzle extension are supplied with each cartridge
Product Videos
Custom Field
Model ET3G22-N
Prop 65 Warning This product contains chemicals like Bisphenol-A and Epichlorohydrin which are listed by the State of California as known to cause Reproductive harm. www.P65Warnings.ca.gov
