Kreg Crosscut Station. It gives you the capabilities of a miter saw using just a circular saw and the precision of guided cutting. Crosscut boards wider than most compound miter saws can handle (up to 12 in. at 90 degrees) and make a variety of miter cuts from 0 to 45 degrees. It is ideally used with circular saws.
Get miter saw quality from your circular saw! The Crosscut Station gives you the capabilities of a miter saw with just a circular saw and Kreg guided cutting. Crosscut boards wider than most compound miter saws can handle (up to 12" at 90 degrees). Make a variety of angle and miter cuts from 0 to 45 degrees with the adjustable fence and positive stops at 0 and 45 degrees. An MDF base and Sure-Cut backboard act as a sacrificial surface for splinter-free cutting results. The MDF base also functions as a kerf line so you can clearly see the blade's path and know exactly where your saw will cut every time. Use material support wings and the detachable blocks to cut long boards safely by supporting your offcuts. They pull out easily when more support is needed, and tuck back in when not in use. The Crosscut Station is quick to set up and easy to store away. Its compact design even makes it portable when you need accurate crosscuts and angle cuts on the go.
- Crosscut up to 12" wide (305mm) and make a variety of miter cuts from 0 to 45 degrees
- MDF base and backboard act as sacrificial surface for splinter-free cutting
- A kerf line you cut into the MDF base shows exactly where your saw will cut
- Material support wings with detachable blocks add offcut support for long pieces
- Works with left- or right-blade circular saws
